-
Staging Dimensions - 4x8 Weather Resistant Quad Decks
All of our stage deck frames are constructed using 6005-T5 4-sided extruded aluminum tube and a specially designed 6005-T5 extruded aluminum corner. Frames are constructed with 8 separate interconnecting pieces bolted together to allow easy field repairs to decks sustaining damage, thereby allowing our customers the ability repair instead of replace. The decks lock together using a Dual Lock™ butt joint cam type coffin lock offering 2,500 lbs of tensile strength. The locks are activated from the top or bottom of the deck with a standard 5/16 allen key. This locking feature provides additional stability to your entire stage. All decks come standard with 3/4″ hook Velcro on all sides of the deck, positioned in a recessed aluminum channel designed to protect the Velcro. This allows for easy installation and removal of accessories or advertising media such as stage
-
Adjustable Legs
16″-24″ or 24″-36″
The adjustable height legs include schedule 40, 1 1/4″ aluminum inner tubes sleeved by 1 7/8″ Telestrut, a 2 inch diameter leveling foot and a CNC machined cap to secure the foot pad. Each non-marring Neoprene foot pad has 2 ½ inches of fine adjustment to allow for easy leveling. The Telestrut is pre-drilled every 2 inches and the button locks allow you to set the leg at virtually any height within the minimum and maximum range.
-
Rolling Legs
12″ or 24″
Rolling legs are available as single or double units for 12″ or 24″ heights. Rolling legs are constructed from schedule 40 1 ¼” aluminum pipe, laser cut steel plates and gussets. Each rolling riser leg consists of a caster with a nipple and different length leg pipe is sleeved over the nipple to create the desired height. Singles, consisting of one pipe and one caster are placed on the outside corners of the stage and the doubles, consisting of two pipes and one caster are used where two decks join together. Rolling riser legs are not adjustable.
-
Staging Dimensions - 36"-56" Wunderstructure W/Locator Plates & Casters
Wunderstructures are constructed using 6061-T6 aluminum pipe and 6005-T5 aluminum tube. The hand activated spring plungers adjust the height in 2 inch increments and the steel zinc chromate 3 inch leveling foot allows for 3 inches of fine adjustment. There are two support arms that swing out and lock into place using a monkey claw clamp system. Wunderstructures are designed for use in all terrain situations and in a bridging system so that one (1) Wunderstructure will support up to four (4) decks. Wunderstructures fold flat for easy storage and locator plates are included.
-
7 Step Unit Adj. 36"-56"
Adjustable height stair units have a steel and aluminum construction and allow our customers a variety of easily achieved height ranges in one stair unit. Height changes are accomplished by turning the comfort grip handles to adjust the run of the stair treads. The adjustable high stair units require no tools for installation, have no loose parts, meet 150 lb. side impact load and install easily with or without handrail. The stairs attach to the stage decks using a self contained, swing-type clamp device which can be customized for use with other stage systems. Stair units fold flat for easy storage. Stair units are available in the standard sizes listed below or can be custom built to your specifications. Adjustable height stair units can easily convert to free standing stairs by simply inserting fixed or adjustable height legs into the specially designed receivers on the stair frame.
-
6 Deck Vertical Cart
Staging Dimensions offers a bolt construction 6 or 8 deck vertical cart consisting of a 2″ x 2″ welded steel frame base and modular uprights. Vertical storage carts allow easy mobility for transportation and storage. The 6 deck vertical cart has a width of 28″ allowing access to standard doorways. The 8 deck vertical cart has a width of 34″.